European Innovation Council

e-peas SA is a Belgian company that specializes in designing and manufacturing electronic systems that enable energy autonomy for Internet of Things (IoT) applications. Founded in 2014 and based in Mont-Saint-Guibert, the company develops energy harvesting solutions that allow IoT devices to draw power from their environment, including sources such as solar, thermal, vibration, and radiofrequency. e-peas produces energy harvesting power management integrated circuits (PMICs) and low-power microcontrollers that enhance the performance and longevity of batteries in connected devices. By facilitating the efficient use of ambient energy, e-peas aims to reduce the need for frequent battery replacements across various sectors, including home automation, healthcare, and agriculture. The company's innovations contribute to making IoT devices smarter and more energy-efficient, ultimately striving for a future where devices can operate indefinitely without traditional power sources.

Lotus Microsystems offers miniaturized highly integrated point of load power converters. The devices are engineered for portable electronics manufacturers ready for usage whenever tiny power supply units are needed. Our devices offer up to 72% reduction in footprint compared to existing solutions with higher efficiency and reliability. Our plug and play solutions enable our customers to innovate their electronics without worrying about power supply units.

Wooptix S.L., founded in 2014 and headquartered in Madrid, Spain, specializes in advanced imaging technologies. The company develops light field and wavefront phase imaging software that captures comprehensive information about light, utilizing the full resolution of sensors. This innovative platform allows for three-dimensional modulation of images across various camera setups, producing volumetric images and videos with enhanced data points and high frame rates. By focusing on improving human interaction with the environment, Wooptix aims to redefine the way users perceive and engage with their surroundings, offering new possibilities for image quality and post-processing capabilities.

EBAMed SA is a Swiss startup based in Geneva, established in 2018, that focuses on developing innovative medical technology for treating heart arrhythmias. The company is working on an ultrasound-based device designed to monitor heart motion and facilitate non-invasive ablation therapy using proton beams. This technology aims to provide a safe and effective alternative for patients by allowing real-time synchronization of proton therapy with heart movement. By integrating both hardware and software components, EBAMed's device enhances treatment capabilities for existing proton therapy centers, enabling them to offer advanced, non-invasive treatment options for cardiac patients in an outpatient setting.

EyeLights specializes in innovative motorcycle accessories by offering a Head Up Display GPS that enhances rider safety and experience. This device projects crucial navigation and safety information directly into the rider's line of sight, allowing them to maintain focus on the road. It alerts users to potential hazards such as dangerous bends, nearby obstacles, and speed limit violations. Designed for quick installation on various types of helmets, the EyeLights product can be set up in under five minutes. Its compact optical technology ensures visibility of GPS data from over two meters away and supports audio functions for up to eight hours. The device is adaptable to sun visors, resistant to rain and fog, and lightweight, weighing less than 100 grams, making it a practical choice for motorcycle enthusiasts seeking enhanced situational awareness while riding.

Nexdot specializes in the synthesis, production, and application of advanced semiconductor nanocrystals known as Quantum Dots (QDs), with a focus on nanoplatelets—two-dimensional nanosheet Quantum Dots that exhibit enhanced properties. Founded as a spin-off from a leading academic laboratory in Paris, Nexdot leverages over a decade of research in nanomaterials to create proprietary materials with controlled shape and composition. These innovations are poised to transform various industries, including displays, lighting, energy storage, detectors, and bio-imaging. Additionally, Nexdot is developing quantum pearl encapsulation technology to enhance the integration of quantum plates into existing production processes, thereby ensuring compliance with environmental regulations. The company is comprised of a dynamic team of skilled scientists and seasoned executives, dedicated to advancing innovation in the field of nanotechnology.

Media-Screen-Matrix: A PET thinfilm, equipped with LED to turn any façade into a media-façade – a huge LED-Screen. It is a wafer-thin, light, highly transparent, cost effective (savings of up to 90%), LED-screen, which is flexible – can be bend and form, cut it like you want to! It is an energy-efficient and universally applicable Thin-Film PET-Substrat, ‘reel to reel’ and width of 600mm. These ribbons of 600mm width and weight of only 250g per m² are to be installed onto glass facades, onto banner (flex-face-signs), or directly fixed onto any façade cladding, Highriser and/or Pylons to play back images, videos or Text (also out of the cloud). The Media-Screen-Matrix is IP67 - for outside usage. Once being installed onto Blow-up-Flexface-Banner or onto glass-facades the ribbons are centrally connected to a supply bar for its electricity and data connection to realize a Media-Façade in the size of a tennis yard, or beyond: Any Size: You say “Stop!”

Dimenco B.V. is a Netherlands-based company that specializes in 3D autostereoscopic technology, offering a range of products and services for both professional and consumer markets. Founded in 2010 and operating as a subsidiary of Top Wise International Enterprise Limited, Dimenco develops 3D displays that allow viewers to see different images without the use of special glasses. Their offerings include autostereoscopic displays, software, content conversion, and consultancy services. The company also provides tools such as the DirectX Visualizer and OpenGL Visualizer, which enable users to experience 3D applications on its displays, and the Dimenco 3D Player for playing 3D video clips. By utilizing a lenticular overlay on LCDs, Dimenco's technology enhances visual experiences, bridging the gap between excitement and reality for users.

FaradaIC Sensors focuses on developing miniaturized gas sensors aimed at enhancing dioxygen detection capabilities for electronic devices. By employing standard microfabrication techniques, the company effectively reduces both the size and power consumption of its sensors, leading to lower production costs. This innovative approach allows for the commoditization of gas sensors, making them accessible and affordable for a variety of Internet of Things applications. FaradaIC Sensors is positioned to capitalize on the growing demand for flexible and cost-effective gas sensing solutions in the expanding IoT market.

Nexdot specializes in the synthesis, production, and application of advanced semiconductor nanocrystals known as Quantum Dots (QDs), with a focus on nanoplatelets—two-dimensional nanosheet Quantum Dots that exhibit enhanced properties. Founded as a spin-off from a leading academic laboratory in Paris, Nexdot leverages over a decade of research in nanomaterials to create proprietary materials with controlled shape and composition. These innovations are poised to transform various industries, including displays, lighting, energy storage, detectors, and bio-imaging. Additionally, Nexdot is developing quantum pearl encapsulation technology to enhance the integration of quantum plates into existing production processes, thereby ensuring compliance with environmental regulations. The company is comprised of a dynamic team of skilled scientists and seasoned executives, dedicated to advancing innovation in the field of nanotechnology.

Media-Screen-Matrix: A PET thinfilm, equipped with LED to turn any façade into a media-façade – a huge LED-Screen. It is a wafer-thin, light, highly transparent, cost effective (savings of up to 90%), LED-screen, which is flexible – can be bend and form, cut it like you want to! It is an energy-efficient and universally applicable Thin-Film PET-Substrat, ‘reel to reel’ and width of 600mm. These ribbons of 600mm width and weight of only 250g per m² are to be installed onto glass facades, onto banner (flex-face-signs), or directly fixed onto any façade cladding, Highriser and/or Pylons to play back images, videos or Text (also out of the cloud). The Media-Screen-Matrix is IP67 - for outside usage. Once being installed onto Blow-up-Flexface-Banner or onto glass-facades the ribbons are centrally connected to a supply bar for its electricity and data connection to realize a Media-Façade in the size of a tennis yard, or beyond: Any Size: You say “Stop!”

Dimenco B.V. is a Netherlands-based company that specializes in 3D autostereoscopic technology, offering a range of products and services for both professional and consumer markets. Founded in 2010 and operating as a subsidiary of Top Wise International Enterprise Limited, Dimenco develops 3D displays that allow viewers to see different images without the use of special glasses. Their offerings include autostereoscopic displays, software, content conversion, and consultancy services. The company also provides tools such as the DirectX Visualizer and OpenGL Visualizer, which enable users to experience 3D applications on its displays, and the Dimenco 3D Player for playing 3D video clips. By utilizing a lenticular overlay on LCDs, Dimenco's technology enhances visual experiences, bridging the gap between excitement and reality for users.

FaradaIC Sensors focuses on developing miniaturized gas sensors aimed at enhancing dioxygen detection capabilities for electronic devices. By employing standard microfabrication techniques, the company effectively reduces both the size and power consumption of its sensors, leading to lower production costs. This innovative approach allows for the commoditization of gas sensors, making them accessible and affordable for a variety of Internet of Things applications. FaradaIC Sensors is positioned to capitalize on the growing demand for flexible and cost-effective gas sensing solutions in the expanding IoT market.

CorTec is a developer and manufacturer focused on creating advanced medical devices for neuromodulation and brain-computer interfaces. The company has spent a decade on research and development, culminating in the innovative CorTec Brain Interchange™ System. This unique platform allows researchers and clinicians to devise novel therapies for neurological disorders. Central to this system are the °AirRay™ electrode arrays, which are laser-structured, soft, and flexible, ensuring a gentle fit to the brain's contours for reliable, permanent recordings. The implanted electronics, protected by biocompatible ceramic encapsulation, preprocess data and include a custom microchip developed with the University of Ulm. This microchip amplifies and digitizes neuronal signals across multiple channels, while eliminating the need for battery replacements through an external inductive power supply. Furthermore, CorTec provides additional support, services, and components related to the Brain Interchange System to Medtech companies and startups in the neurotechnology sector.

EyeLights specializes in innovative motorcycle accessories by offering a Head Up Display GPS that enhances rider safety and experience. This device projects crucial navigation and safety information directly into the rider's line of sight, allowing them to maintain focus on the road. It alerts users to potential hazards such as dangerous bends, nearby obstacles, and speed limit violations. Designed for quick installation on various types of helmets, the EyeLights product can be set up in under five minutes. Its compact optical technology ensures visibility of GPS data from over two meters away and supports audio functions for up to eight hours. The device is adaptable to sun visors, resistant to rain and fog, and lightweight, weighing less than 100 grams, making it a practical choice for motorcycle enthusiasts seeking enhanced situational awareness while riding.

EyeLights specializes in innovative motorcycle accessories by offering a Head Up Display GPS that enhances rider safety and experience. This device projects crucial navigation and safety information directly into the rider's line of sight, allowing them to maintain focus on the road. It alerts users to potential hazards such as dangerous bends, nearby obstacles, and speed limit violations. Designed for quick installation on various types of helmets, the EyeLights product can be set up in under five minutes. Its compact optical technology ensures visibility of GPS data from over two meters away and supports audio functions for up to eight hours. The device is adaptable to sun visors, resistant to rain and fog, and lightweight, weighing less than 100 grams, making it a practical choice for motorcycle enthusiasts seeking enhanced situational awareness while riding.

e-peas SA is a Belgian company that specializes in designing and manufacturing electronic systems that enable energy autonomy for Internet of Things (IoT) applications. Founded in 2014 and based in Mont-Saint-Guibert, the company develops energy harvesting solutions that allow IoT devices to draw power from their environment, including sources such as solar, thermal, vibration, and radiofrequency. e-peas produces energy harvesting power management integrated circuits (PMICs) and low-power microcontrollers that enhance the performance and longevity of batteries in connected devices. By facilitating the efficient use of ambient energy, e-peas aims to reduce the need for frequent battery replacements across various sectors, including home automation, healthcare, and agriculture. The company's innovations contribute to making IoT devices smarter and more energy-efficient, ultimately striving for a future where devices can operate indefinitely without traditional power sources.

S.I.T. provides copper intraoperative electron radiation therapy, flash radiation therapy research systems, a machining laboratory, a vacuum laboratory, a radio frequency laboratory, a welding laboratory, discovering, and developing services.

Hexagem is working with a number of industrial partners to bring their substrate technology into high quality devices for RF applications. They are interested to expand their current network of industrial partners with high quality partners with strong RF device expertise.

C2C NewCap, founded in 2014 by Rui Silva and Andre Mao de Ferro, is a Lisbon-based manufacturer specializing in the production of supercapacitors designed for efficient electrical energy storage. The company focuses on developing next-generation devices that utilize proprietary electrodes and an aqueous electrolyte, which contribute to a low environmental impact. C2C NewCap aims to provide clients with energy storage solutions that not only enhance operational efficiency but also reduce overall environmental and operational costs.

Avantama is a leading developer of nanomaterials specifically designed for electronic applications. The company specializes in nanoparticle dispersions and formulations that facilitate the production of high-quality optical and electronic coatings through established printing and coating techniques. Avantama's innovative technology enables rapid proof-of-concept development and tailored product solutions, significantly accelerating the time-to-market for clients. With a production capacity at the multi-ton scale, Avantama adheres to high production standards suitable for the electronics industry. The company offers various services, including joint development, contract licensing, and customized nanoparticle compositions, catering to applications such as displays, OLEDs, and quantum dot displays.

Ignion is an antenna innovator based in Sant Cugat del Vallès, Spain, founded in 2015. The company specializes in manufacturing multiband, multipurpose antennas that cater to mobile and wireless connectivity requirements. Its product offerings include ready-to-use antennas designed for Internet of Things applications and short-range wireless devices, particularly suited for indoor environments. Ignion's solutions allow clients to seamlessly integrate these antennas into their industrial designs, facilitating efficient connectivity in various applications.

Dracula Technologies SAS, based in Valence, France, specializes in organic photovoltaic technology aimed at providing sustainable energy solutions for low-power devices. Founded in 2011, the company has developed an innovative product called Light As Your Energetic Response (LAYER), which captures ambient light—both indoors and outdoors—and converts it into electricity. This technology enables a variety of small devices, including phones, GPS units, and lamps, to recharge autonomously, thereby eliminating the need for traditional batteries. By utilizing digital printing techniques to create efficient light-harvesting modules, Dracula Technologies enhances the reliability and operational lifespan of electronic devices such as sensors and smart building applications, contributing to a more sustainable energy future. The company operates as a subsidiary of Ardeje.

Aligned Bio specializes in the development of advanced nanowire biosensor platforms that cater to various industries, including biomedicine, water purification, public safety, and personal electronics. The company’s proprietary methods for nanowire production and alignment enhance the sensitivity and accuracy of its sensors, making them highly effective for applications such as disease diagnosis, pathogen identification, pesticide detection, and pollution monitoring. By leveraging the large area of nanowires and improved signal capacity, Aligned Bio enables sensor manufacturers to achieve superior performance at a reduced cost, positioning itself as a key player in the evolving biosensor and electronics markets.

Aligned Bio specializes in the development of advanced nanowire biosensor platforms that cater to various industries, including biomedicine, water purification, public safety, and personal electronics. The company’s proprietary methods for nanowire production and alignment enhance the sensitivity and accuracy of its sensors, making them highly effective for applications such as disease diagnosis, pathogen identification, pesticide detection, and pollution monitoring. By leveraging the large area of nanowires and improved signal capacity, Aligned Bio enables sensor manufacturers to achieve superior performance at a reduced cost, positioning itself as a key player in the evolving biosensor and electronics markets.

Wooptix S.L., founded in 2014 and headquartered in Madrid, Spain, specializes in advanced imaging technologies. The company develops light field and wavefront phase imaging software that captures comprehensive information about light, utilizing the full resolution of sensors. This innovative platform allows for three-dimensional modulation of images across various camera setups, producing volumetric images and videos with enhanced data points and high frame rates. By focusing on improving human interaction with the environment, Wooptix aims to redefine the way users perceive and engage with their surroundings, offering new possibilities for image quality and post-processing capabilities.

SciMo provides electric motor services such as electromagnetic design, mechanical calculations, and motor prototype production. The company was founded in 2017 and is based in Karlsruhe, Baden-Württemberg.

Lotus Microsystems offers miniaturized highly integrated point of load power converters. The devices are engineered for portable electronics manufacturers ready for usage whenever tiny power supply units are needed. Our devices offer up to 72% reduction in footprint compared to existing solutions with higher efficiency and reliability. Our plug and play solutions enable our customers to innovate their electronics without worrying about power supply units.

DELMIC specializes in correlative light and electron microscopy technology, focusing on applications in life and materials science research. The company offers a range of services, including cathodoluminescence, automated cryo-electron tomography workflows, and efficient electron microscopy solutions. These services are designed to enhance research capabilities by providing reliable and high-throughput methodologies, enabling researchers and organizations to gain insights more quickly and effectively. Through its innovative tools and integrated microscopy approaches, DELMIC aims to facilitate advancements in scientific research.

Multicharge is a British company specialising in products that make multiple charging simple.

Intelligent Implants, founded in 2014 in Cork, Ireland, specializes in the development of wireless implantable electronics designed to stimulate, steer, and monitor bone growth. The company focuses on creating electrotherapeutic devices that not only treat diseases but also support the recovery of bone and other tissues. By integrating data, engineering, and medicine, Intelligent Implants aims to deliver innovative, active, and connected medical devices that enhance patient treatment and facilitate decision-making for healthcare professionals. Their technology allows for the acceleration and adjustment of bone growth, enabling healthcare providers to effectively utilize electrotherapeutics to monitor and control patient conditions, ultimately leading to more timely and informed medical interventions.

Multicharge is a British company specialising in products that make multiple charging simple.

Aledia SA specializes in the development and manufacturing of innovative light-emitting diodes (LEDs) utilizing a unique 3D architecture based on gallium-nitride-on-silicon microwires. Founded in 2011 and headquartered in Grenoble, France, with additional subsidiaries in Malacca, Malaysia, and Palo Alto, California, Aledia's technology employs standard 8-inch silicon wafers and existing fabrication processes, allowing for the production of LED chips at a significantly reduced cost compared to traditional planar designs. This technology supports a range of applications, including general lighting, automotive, and display technologies, specifically for mobile and microdisplays used in augmented and virtual reality environments. Aledia's focus on efficient, brighter, and cost-effective displays positions it as a key player in the LED market.

Wattalps specializes in developing lithium power systems aimed at providing affordable battery solutions for small and medium series applications. The company's products prioritize passive safety, cooling efficiency, long life, and cell protection, facilitating the integration of these systems into vehicles and charging stations. With a focus on creating standard and modular designs, Wattalps aims to simplify installation processes, making them both fast and cost-effective. By advancing these technologies, the company contributes to the broader adoption of electric vehicles and sustainable transportation solutions.

Wattalps specializes in developing lithium power systems aimed at providing affordable battery solutions for small and medium series applications. The company's products prioritize passive safety, cooling efficiency, long life, and cell protection, facilitating the integration of these systems into vehicles and charging stations. With a focus on creating standard and modular designs, Wattalps aims to simplify installation processes, making them both fast and cost-effective. By advancing these technologies, the company contributes to the broader adoption of electric vehicles and sustainable transportation solutions.

Heyday Integrated Circuits is a semiconductor company based on designing and selling isolated gate drivers for the power electronics market.

e-peas SA is a Belgian company that specializes in designing and manufacturing electronic systems that enable energy autonomy for Internet of Things (IoT) applications. Founded in 2014 and based in Mont-Saint-Guibert, the company develops energy harvesting solutions that allow IoT devices to draw power from their environment, including sources such as solar, thermal, vibration, and radiofrequency. e-peas produces energy harvesting power management integrated circuits (PMICs) and low-power microcontrollers that enhance the performance and longevity of batteries in connected devices. By facilitating the efficient use of ambient energy, e-peas aims to reduce the need for frequent battery replacements across various sectors, including home automation, healthcare, and agriculture. The company's innovations contribute to making IoT devices smarter and more energy-efficient, ultimately striving for a future where devices can operate indefinitely without traditional power sources.

Aledia SA specializes in the development and manufacturing of innovative light-emitting diodes (LEDs) utilizing a unique 3D architecture based on gallium-nitride-on-silicon microwires. Founded in 2011 and headquartered in Grenoble, France, with additional subsidiaries in Malacca, Malaysia, and Palo Alto, California, Aledia's technology employs standard 8-inch silicon wafers and existing fabrication processes, allowing for the production of LED chips at a significantly reduced cost compared to traditional planar designs. This technology supports a range of applications, including general lighting, automotive, and display technologies, specifically for mobile and microdisplays used in augmented and virtual reality environments. Aledia's focus on efficient, brighter, and cost-effective displays positions it as a key player in the LED market.

EBAMed SA is a Swiss startup based in Geneva, established in 2018, that focuses on developing innovative medical technology for treating heart arrhythmias. The company is working on an ultrasound-based device designed to monitor heart motion and facilitate non-invasive ablation therapy using proton beams. This technology aims to provide a safe and effective alternative for patients by allowing real-time synchronization of proton therapy with heart movement. By integrating both hardware and software components, EBAMed's device enhances treatment capabilities for existing proton therapy centers, enabling them to offer advanced, non-invasive treatment options for cardiac patients in an outpatient setting.

AEInnova, founded in 2014 at the Autonomous University of Barcelona, specializes in innovative Internet of Things (IoT) solutions for predictive maintenance. The company was established by a team of PhDs and engineers with expertise in microelectronics and various engineering disciplines. AEInnova's flagship product, InduEye, is a fully battery-less and autonomous device that monitors vibrations, steam traps, and thermal conditions, harnessing energy from waste heat, with future versions incorporating solar and wind power. The technology stands out due to its patented innovation, which enhances performance and enables real-time edge computing while utilizing advanced wireless communication standards. AEInnova's devices are employed in diverse sectors, including oil and gas, aluminum, steel, paper, and water treatment, and feature a sophisticated IoT cloud-based dashboard for data analytics and predictive maintenance. The company has received 31 international awards for its contributions to sustainability and innovation and has secured significant investment, including funding from the European Commission. AEInnova is actively engaged in multiple EU R&D projects focused on energy harvesting and IoT technologies.

C2C NewCap, founded in 2014 by Rui Silva and Andre Mao de Ferro, is a Lisbon-based manufacturer specializing in the production of supercapacitors designed for efficient electrical energy storage. The company focuses on developing next-generation devices that utilize proprietary electrodes and an aqueous electrolyte, which contribute to a low environmental impact. C2C NewCap aims to provide clients with energy storage solutions that not only enhance operational efficiency but also reduce overall environmental and operational costs.

AEInnova, founded in 2014 at the Autonomous University of Barcelona, specializes in innovative Internet of Things (IoT) solutions for predictive maintenance. The company was established by a team of PhDs and engineers with expertise in microelectronics and various engineering disciplines. AEInnova's flagship product, InduEye, is a fully battery-less and autonomous device that monitors vibrations, steam traps, and thermal conditions, harnessing energy from waste heat, with future versions incorporating solar and wind power. The technology stands out due to its patented innovation, which enhances performance and enables real-time edge computing while utilizing advanced wireless communication standards. AEInnova's devices are employed in diverse sectors, including oil and gas, aluminum, steel, paper, and water treatment, and feature a sophisticated IoT cloud-based dashboard for data analytics and predictive maintenance. The company has received 31 international awards for its contributions to sustainability and innovation and has secured significant investment, including funding from the European Commission. AEInnova is actively engaged in multiple EU R&D projects focused on energy harvesting and IoT technologies.

AEInnova, founded in 2014 at the Autonomous University of Barcelona, specializes in innovative Internet of Things (IoT) solutions for predictive maintenance. The company was established by a team of PhDs and engineers with expertise in microelectronics and various engineering disciplines. AEInnova's flagship product, InduEye, is a fully battery-less and autonomous device that monitors vibrations, steam traps, and thermal conditions, harnessing energy from waste heat, with future versions incorporating solar and wind power. The technology stands out due to its patented innovation, which enhances performance and enables real-time edge computing while utilizing advanced wireless communication standards. AEInnova's devices are employed in diverse sectors, including oil and gas, aluminum, steel, paper, and water treatment, and feature a sophisticated IoT cloud-based dashboard for data analytics and predictive maintenance. The company has received 31 international awards for its contributions to sustainability and innovation and has secured significant investment, including funding from the European Commission. AEInnova is actively engaged in multiple EU R&D projects focused on energy harvesting and IoT technologies.

NanoAvionics is a manufacturer and integrator of small satellite bus systems, with operations in the US, UK, and Lithuania. The company specializes in providing end-to-end small satellite solutions tailored for both single missions and larger constellations. Its offerings include a commercial-grade satellite platform that integrates essential components such as flight computers, attitude determination and control systems (ADCS), communication subsystems, and propulsion systems based on non-toxic mono-propellants. This modular approach not only enhances the functionality of small satellites but also optimizes hardware, launch, and operational costs. With a core engineering team that boasts over 85 successful satellite missions and projects, NanoAvionics aims to deliver economic viability for a diverse range of satellite missions across various sectors globally.

Nova Fabrica is a manufacturer and global supplier specializing in thin film process components essential for vacuum and plasma-based technologies. The company offers a diverse range of products, including plasma monitoring and control systems, plasma generators, bias power supplies, and magnetron sputtering devices. Its comprehensive portfolio also features advanced systems for reactive gas control, gas analysis, deposition rate measurement, and optical monitoring. In addition to its core products, Nova Fabrica provides integration support and training services to help plasma processing system manufacturers effectively utilize its technologies. Through a robust sales network, the company ensures that its specialist products, such as the FloTron™ process control systems, are accessible to customers worldwide.

Valtavalo Ltd was founded in 2008 to develop, manufacture and supply energy-efficient lighting solutions in Finland and globally. By concentrating on large volumes and clients, Valtavalo, as the largest LED tube manufacturer in the Northern Countries, can set competitive prices for new and advanced technologies, which have often in the past been regarded as too expensive.

Nova Fabrica is a manufacturer and global supplier specializing in thin film process components essential for vacuum and plasma-based technologies. The company offers a diverse range of products, including plasma monitoring and control systems, plasma generators, bias power supplies, and magnetron sputtering devices. Its comprehensive portfolio also features advanced systems for reactive gas control, gas analysis, deposition rate measurement, and optical monitoring. In addition to its core products, Nova Fabrica provides integration support and training services to help plasma processing system manufacturers effectively utilize its technologies. Through a robust sales network, the company ensures that its specialist products, such as the FloTron™ process control systems, are accessible to customers worldwide.